Contact

Get in Touch

Whether you need a quote for ESP parts, engineering support, or have a general question—our team is ready to assist. Reach out and we’ll respond promptly with the right solution for your needs.

Physical Address

7658 Philips Highway,
Jacksonville, FL 32256

Email Address

info@envision-parts.com

Phone Numbers

Let’s talk about your project.

Bearing

Bushing Outer/Inner Dia.	(Ø7 1/4'')/(Ø6 1/8'')
Bushing Width	10''
Base Length/Width/Height	(1'-6'')/7''/(1 7/8'')
Base Slot Dia.	Ø1 5/8''
Base Tilt Angle	40°
Weight	106 lb
Material	Cast Iron

Bearing

Dust Bearing

Height	11.5''
Length	9.1''
Width	4.3''
Weight	16.75 lb
Material	20# Steel

Dust-Bearing

V15 Discharge Electrode

Max. Length	118.11''
Plate Thickness	0.06''
Plate Width	0.59''
End Tube Dia.	Ø0.31''
Pin Length	1.18''
Pin Spacing	2.95''
Pin Arrangement	Throughout
Material	Q235B and SPCC

V15-Discharge-Electrode

Rigid Discharge Electrode, variable pin spacing

Max. Length	216.54''
Length of Cross section/Longitudinal section	1.38''/0.94''
Pin Spacing	1.97''
Pin Arrangement	Staggered U-type
Material	Q235B and SPCC

Rigid-Discharge-Electrode-variable-pin-spacing

CE Rapping Bar

Length	166.9''
Width	3.0''
Height	3.9''
Weight	131.0 lb
Material	Q235B

CE-Rapping-Bar

Fluoroelastomer Rapper Boot Seal

Part No.	PB3280
Top/Bottom Port Inner Dia.	Ø2''/(Ø4 1/2'')
Height	4 3/8''
Thickness	3/16''
Weight	0.83 lb
Colour	Black
Max. Elongation	500%
Shore A Hardness	50-60
Material	Fluoroelastomer (FKM)

Fluoroelastomer-Rapper-Boot-Seal

Suspension Plate

Part No.	PC2487C
Steel Plate Height/Dia.	1''/Ø28.35''
Central Hole Dia.	Ø16.50''
Nuts Distance	26''
Weight	118.60 lb
Material	Q235B and 20# steel

Suspension-Plate

Rapper Insulator Rod Alumina

Part No.	PB3051BD
Operating Voltage	80KV
Length	20.50''
Rod Dia.	Ø2.76''
Both Ends Dia.	Ø2.57''
Weight	14.55 lb
Material	95% Al₂O₃

Rapper-Insulator-Rod-Alumina

Insulated Flange Plate

Part No.	PC2937C
Steel Plate Height/Dia.	1''/(Ø1'-4 1/4'')
Central Hole Dia.	2 1/4''
Rings Outer Dia./Length	Ø2.87''/0.51''
Inch Pipes Length	3.35''
Inch Elbow Angle	45°
Weight	58.20 lb
Material	Q235B and 20# steel

Insulated-Flange-Plate

Rapper Rod Boot Clamps

Part No.	PB3283/WA42436
Clamp Dia. Range	(Ø2” to Ø2 9/16”)/(Ø4 1/16'' to Ø5'')
Compatibility	used on Upper/Lower rubber rod boot
Weight	0.05 lb/0.08 lb
Material	Stainless steel

Rapper-Rod-Boot-Clamps

Spreader

Part No.	PD3570-10
Width/Height	1.8''/1.8''
Steel Plate Top/Bottom Length	8''/14''
Holes Dia. on the Top/Bottom Surface	(Ø7/8'')/(Ø1 1/4'')
Holes Spacing	8''
Round Steel Height/Dia.	(1 1/2'')/Ø0.63''
Weight	10.1 lb
Material	Q235B and 20# steel

Spreader

Hypalon Rapper Boot Seal

Part No.	PB3293
Top/Bottom Port Inner Dia.	Ø2''/(Ø2 7/8'')
Height	4''
Thickness	3/16''
Weight	0.44 lb
Colour	Black
Material	Chlorosulfonated Polyethylene (CSM)

Hypalon-Rapper-Boot-Seal

Bushing, Split Tailshaft

Contact Us

Part No.	PB3222
Length	4''
Outer/Inner Dia.	Ø5''/Ø4''
Open Edge Dia.	Ø5.25''
Chamfer	0.03''*45°
Weight	8.15 lb
Material	Graphalloy

Bushing-Split-Tailshaft

Locking Collar, Tailshaft

Contact Us

Outer Dia.	Ø5.4''
Inner Dia.	Ø3.9''
Weight	3.6 lb
Material	SPCC

Locking-Collar-Tailshaft

Stop Ring

Contact Us

Outer Dia.	Ø3''
Inner Dia.	Ø2''
Thickness	0.7''
Weight	0.88 lb
Material	316L and 20# Steel

Stop-Ring

Clamp Coupling

Contact Us

Part No.	PA1146C
Total Length	7''
Max. Outer Dia.	Ø3.3''
Opening Dia. at Both Ends	Ø2.7''/Ø1.9''
Slot Length	2.0''
Slot Width	0.5''
Weight	8.8 lb
Material	20# Steel

Clamp-Coupling

Sleeve Assembly

Contact Us

Length	5.12''
Outer Dia.	Ø2.80''
Inner Dia.	Ø1.97''
Weight	4.50 lb
Material	25# Steel

Sleeve-Assembly

Rapper Socket for Vibrator

Contact Us

Part No.	PB2273
Outer Dia.	Ø2.4''
Length	5''
Chamfer	3/8''*45°
Weight	3.16 lb
Material	20# Steel

Rapper-Socket-for-Vibrator

Rapping Hammer

Contact Us

Height	12.1''
Width	5.2''
Hammer Radius	R1.6''
Weight	15.5 lb
Material	20# Steel and 45# Steel

Rapping-Hammer

Magnetic Impulse Gravity Impact Rappers (MIGI)

Contact Us

Height	37.46''/37.50''
Upper/Lower Flange Holes Dia.	Ø0.55''/Ø0.43''
Upper/Lower Flange Dia.	Ø9.00''/Ø8.00''
Weight	46.3 lb
Voltage	120Vdc/240Vdc
Coil Resistance	2.6Ω/4.6Ω
Color	Finished with gray primer and topcoat
Material	Q235B and Stainless steel

Magnetic-Impulse-Gravity-Impact-Rappers-MIGI

Electric Single Impact Rappers(ESI)

Contact Us

Part No.	CPD3588/CPD3418-WK
Height	31.5''/27.0''
Flange Holes Dia.	Ø0.56''/Ø0.69''
Flanges Dia.	Ø9.06''/Ø9.49''
Weight	46.3 lb/38.7 lb
Voltage	120Vdc/240Vdc
Coil Resistance	2.5Ω/8.3Ω
Color	Finished with gray primer and topcoat
Material	Q235B and Stainless steel

Electric-Single-Impact-Rappers-ESI

Triple Spring Retainer

Contact Us

Part No.	PB2280
Steel Plate Central Hole Dia.	Ø2 1/8''
Guide Ring Outer Dia.	Ø2.9''
Length/Width/Height	(14 3/8'')/(1'-3 3/4'')/2''
Weight	41 lb
Material	Q235B and 20# steel

Triple-Spring-Retainer

Heaters

Contact Us

Outer Dia. of the Circular Ring	Ø14.75''
Thickness of the Circular Ring	3.94''
Weight	5.30 lb
Electrical	460V/480V, 400W
Material	Stainless Steel

Heaters

Rapper Insulator Rods

Contact Us

Part No.	PA1511(G11)/PB3400(G11)/PB3051B(G11)
Mechanical Strength	Compressive strength≥600MPa/Flexural strength≥150MPa
Operating Voltage	Withstand Voltage≥100KV/Breakdown Voltage≥120KV
Length	40''/48''/30''
Rod Dia.	Ø2 1/64''
Both Ends Dia.	Ø1.5''
Weight	8.8 lb/11.5 lb/5.5 lb
Material	Fiber Reinforced Polymer(FRP) G11 Class H

Rapper-Insulator-Rods

Insulator-Straight Alumina

Contact Us

Part No.	CPB2481A
Height/Inner Dia.	2'/Ø1'
Thickness	1''
Weight	138 lb
Operating Voltage/Temp.	Rated Voltage≥80KV and Breakdown Voltage≥120KV at 932°F
Compression Load Test	Failure Load≥500KN
Dielectric Strength	210V/mil at 78.8°F
Volume Resistivity	4.6*10¹⁰Ω.cm at 572°F
Material	95% Al₂O₃

Insulator-Straight-Alumina

Anti-Sway Insulator

Contact Us

Length/Width/Height	17.51''/4.00''/0.75''
Weight	1.60 lb
Holes Dia.	Ø1''
Rated Working Voltage/Temp.	80KV at 392°F
Colour	White
Material	Virgin Telflon(PTFE)

Anti-Sway-Insulator

Spring

Contact Us

Part No.	PA1104/PA1105
Wire Dia.	(Ø25/32'')/(Ø29/32'')
Outer Dia.	Ø4.563''/Ø4.875''
Inner Dia.	Ø3.00''/Ø3.06''
Free Length	6.5''/7.5''
Spring Rate	(2160 lb/in between length of 6.13'' and 5.81'')/(3620 lb/in between length of 7.09'' and 6.86'')
Weight	10.14 lb/11.46 lb
Material	60Si2MnA

Spring

Sliding Base Plate

Contact Us

Part No.	PB2547
Corona Shield Height/Dia.	(8 7/8'')/Ø1'
Steel Plate Height/Outer Dia.	1''/Ø2'
Steel Pipes Length/Outer Dia.	2''/(Ø1.06'')
Weight	105.6 lb
Material	Q235B and 20# steel

Sliding-Base-Plate

Rigid Discharge Electrode, SUS316L Tube

Contact Us

Max. Length	628.50''
Tube Dia.	Ø1.50''/Ø2.01''
Pin Length	1.50''/2.24''
Pin Spacing	3''/6''
Pin Arrangement	Opposed/Staggered
Material	Q235B and SPCC

Rigid-Discharge-Electrode-SUS316L-Tube

Anvil

Contact Us

Part No.	PD3570-11A/PD3570-12C/PD3570-16G
Length	12.8''/13.8''/17.8''
Width	4''
Height	1.5''
Holes Dia. on the Top/Bottom Surface	(Ø7/8)''/(Ø1 1/4'')
Holes Spacing	11''/12''/16''
Weight	22 lb/23 lb/30 lb
Material	Q235B

Anvil

Positioner

Contact Us

Part No.	PD3570-11B/PD3570-12D/PD3570-16H
Length	9''/10''/14''
Width	4''
Height	3 1/2''
Hole Dia.	2 1/4''
Weight	2.0 lb/2.5 lb/5.5lb
Material	Q235B

Positioner

Washer, Plate Support

Contact Us

Part No.	PB2414
Length/Width	4''/4''
Central Hole Dia.	Ø1 1/16''
Height	3/4''
Weight	3.30 lb
Material	Q235B

Washer-Plate-Support

Rapper Piston

Contact Us

Part No.	PB3562
Piston Body Length/Dia.	18''/(Ø2 1/4'')
Steel Head Length/Dia.	1/2''/(Ø1 1/4'')
Piston Fillet Rad.	R1/4''
Weight	20 lb
Material	45# steel and Stainless steel

Rapper-Piston

GA CE Plate

Contact Us

Width	19.09''
Height	1.97''
Thickness	0.05''
Material	SPCC

GA-CE-Plate

ZT24 CE Plate

Contact Us

Width	20.08''
Height	1.57''
Thickness	0.05''
Material	SPCC

ZT24-CE-Plate

Z388 Collecting Plate

Contact Us

Width	23.03''
Height	1.97''
Thickness	0.05''
Material	SPCC

Z388-Collecting-Plate

C735 Collecting Plate

Contact Us

Width	28.94''
Height	1.97''
Thickness	0.05''
Material	SPCC

C735-Collecting-Plate

C480 Collecting Plate

Contact Us

Width	18.90''
Height	1.97''
Thickness	0.05''
Material	SPCC

C480-Collecting-Plate